A007 EPM (schematic)
Overview
Below you will find the schematic for A007 EPM as well as key operational features and additional support information to assist with your installation.
Installation Schematic: A007 EPM
Operation Features
- Activation occurs automatically after the ignition has been on for 10 minutes OR by use of the 8-way overhead red lights, whichever occurs first
- Deactivates in Key OFF position
- Unlimited time to perform the child check
- Horn will sound for 5 minutes if the child check is not done
- To silence the alarm, cycle the key on and then back to off
- Dome lights will illuminate for 2 minutes after deactivation
- The door is monitored and needs to remain closed during deactivation
- Can wait in Accessory position for up to 2 minutes (can be extended by cycling the key)
Order Information
Module: A007 EPM
Upgraded Component Kit: AC31 (For dome light, accessory and pilot light feature, LED not supplied)
- A033: RVT - Deactivation Button
- P100: 6-Pin Wire Harness
- A026: 3-Pin Diode Wire Harness
- P038: 2-Pin Wire Harness
