System Tones
Operation Tones are the beeps and chirps that come from all of our systems and they assist greatly with operation, installation and troubleshooting.
Ignition On: This tone is heard when the ignition key is positioned in Key ON prior to activation.
Power Up Tone: This tone is heard when the 6 pin connector is connected to the module.
Auto activation: This tone is heard when system Auto activation occurs.
Manual Activation: This tone is heard when manual activation occurs.
Child Check Reminder Tone: This reminder is repeated every 30 seconds when the system is ready to be deactivated.
Child check not done: This tone is heard prior horn engaging.
Deactivation Tone: This tone is heard when successfully deactivation occurs.
Ground Detection Tone: Deactivation will not occur if a ground is present on the deactivation circuit.
Parking brake Tone: This tone is heard if the parking brake isn't applied and deactivation is attempted.
Door Monitor Tone: For systems where deactivation occurs in the Key Off position a tone will be heard followed by the horn if the door is open or opened during. deactivation.
Door Monitor cycle On Tone: If the door monitor tone goes off the door must be closed and the key positioned to ON silence the horn.
