EP2Plus Electrical Specifications
Overview
The EP2 is a microprocessor-based system.
Operating Temperature
-40 to 85 degrees Celsius
Operating Voltage
10-40VDC
Current Draw
- Quiescent state: 36mA typical
- Quiescent state with Motion Sensor: 46mA typical
- Max Current: 200 mA typical.
Impedance Inputs
All inputs >50k ohms
Outputs
Control Outputs current limited to a maximum of 300mA for sink outputs.
- Dome Light and Horn circuits utilize a resistor in series with drive transistors to limit current in a fault state.
Digital Outputs source current limited to 50mA for P062 and 150mA for A066.
- Digital Output circuits utilize a resistor in series with drive transistors to limit current in a fault state.
Transient signals.
- The EP2Plus system has immunity to conduct transient signals on the power leads based on SAE J1113-11
The Module is constructed using UL94V- certified, self-extinguishing, fire retardant materials in case of a thermal event.
